Rockwell Automation 1766-L32 Pump Station Controller Quick Start - Manual (Page 31)

Publication IASIMP-QS037A-EN-P - May 2013 29
Chapter 1
Alarms Screen
From the Alarms screen you can view a list of active and/or inactive alarms.
Active alarms are shown in white against a red background, and inactive
alarms are shown in blue against a white background. The newest alarms
-- PUMP #3 --
HAS ITS SEAL FAIL INTERLOCK ENABLED
AN INPUT NEEDS TO BE ASSIGNED TO
"SEAL FAIL"
OR THE INTERLOCK NEEDS TO BE
DISABLED
-- PUMP #4 --
HAS ITS OVERLOAD TRIPPED/VFD FAULT
INTERLOCK ENABLED
AN INPUT NEEDS TO BE ASSIGNED TO
"OL TRIPPED/VFD FAULT"
OR THE INTERLOCK NEEDS TO BE
DISABLED
-- PUMP #4 --
HAS ITS OVER TEMP INTERLOCK ENABLED
AN INPUT NEEDS TO BE ASSIGNED TO
"OVER TEMP"
OR THE INTERLOCK NEEDS TO BE
DISABLED
-- PUMP #4 --
HAS ITS SEAL FAIL INTERLOCK ENABLED
AN INPUT NEEDS TO BE ASSIGNED TO
"SEAL FAIL"
OR THE INTERLOCK NEEDS TO BE
DISABLED
-- PRESSURE MODE --
ALL PUMPS TURNED OFF DUE
TO HIGH PRESSURE