Rockwell Automation 1766-L32 Pump Station Controller Quick Start - Manual (Page 28)

26 Publication IASIMP-QS037A-EN-P - May 2013
Chapter 1
– Press CLEAR THE SAVED RECIPE to clear the selected
database recipe.
3. Once the desired recipe is selected from the list, press VFD (NODE) #
to select the VFD using the parameters you want to save. This option is
visible only if a PowerFlex VFD is found at the appropriate node.
To load a recipe:
1. From the PowerFlex 4 VFD Parameters screen, press Load PowerFlex
4 VFD Parameters From Database Into VFD to open the Load
VFD Parameters screen.
2. Press UP/DOWN to select a database recipe from the list.
3. Press VFD (NODE) # to select the VFD into which you wish to load
the selected recipe. This option is visible only if a PowerFlex VFD is
found at the appropriate node.
Not all of the parameters are loaded into the VFD. The Modbus node
address, comm speed and comm formate will not overwrite what is
already set in the VFD. This way the VFD parameters from node #1 can
be written into the VFD at node #2.
TIP
If the system has a combination of different PowerFlex 4 VFD’s, such as one
PowerFlex 4 and one PowerFlex 40. Care needs to be taken to ensure that the
parameters of a PF 4 VFD do not get loaded into a PF 40 VFD.
TIP
After the parameters are loaded into the VFD. The VFD needs to have the power
cycled in order for the new parameters to take effect.