Rockwell Automation 1766-L32 Pump Station Controller Quick Start - Manual (Page 9)

Publication IASIMP-QS037A-EN-P - May 2013 7
Chapter 1
Configuring the Application
The functions available when you select the Application Config button
include:
● Select the pumps and pump modes
● Select primary and secondary measuring devices
● Select control devices for all active pumps
● Assign digital inputs and their states
● Assign backup pumps
Each of the configuration screens contains standard navigational tools:
● Press Prev or Next to navigate between screens.
● Press Up, Down, or Enter to navigate available choices on a single
screen.
● Press Exit to return to the Main menu.
To use the configuration controls:
1. From the Main screen, press Application Config to display the
configuration screen.
From the configuration screen you can:
– Use the Up/Down/Enter buttons to select from the three available
operation modes
– Press Enter The Number Of Pumps to select the number of
pumps (1-4) in use in the system
– View a description of the selected mode