Rockwell Automation 1766-L32 Pump Station Controller Quick Start - Manual (Page 8)

6 Publication IASIMP-QS037A-EN-P - May 2013
Chapter 1
Main Screen
The main screen displays configuration, monitoring and maintenance controls.
Some control label content displays based on the current configuration.
Several of the buttons on the Main screen do not display until the application
has been set up. So the first step is to go through the Application Config
button.
Flashes when a Warning exists Flashes when an Alarm exists Common header
Not visible until an application has been selected
Only visible if analog device is being used
Legend depends on if Pressure Follower,
Level Pump Down or Level Pump Up mode is selected
Legend depends on if Pressure Follower”
mode is selected or Level mode is selectd