Set the node address and communication rate, Set the node, Address and – Rockwell Automation Logix5000 Control Systems: Connect a PowerFlex 70 Drive over DeviceNet Quick Start User Manual
Page 17: Communication
Advertising
![background image](/manuals/581136/17/background.png)
Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012
17
Prepare the PowerFlex 70 Drive Hardware Chapter 1
Set the Node Address and Communication Rate
1.
Use a small screwdriver to rotate
the switches to the desired value to
set the adapter’s node address.
This quick start uses a node
address 1.
2.
Use a small screwdriver in the same
manner to set the DeviceNet
adapter’s communication rate.
This quick start uses 125 Kbps.
2
1
0
9
8
3
4
5
6
7
2
1
0
9
8
3
4
5
6
7
Tens Digit
Ones Digit
PGM
500K
250K
125K
AUTO
Advertising