Rockwell Automation Logix5000 Control Systems: Connect a PowerFlex 70 Drive over DeviceNet Quick Start - Manual (Page 34)

34 Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012
Chapter 2 Create DeviceNet Network Software Files
5. Configure the scanner module’s
parameters on the RSNetWorx tab to
associate the RSLogix 5000 project
with the DeviceNet configuration file
created in
Create a DeviceNet
Configuration File on page 29 .
a. On the click Browse.
b. Navigate to the DeviceNet
configuration file and click Open.
6. Click OK.
7. Save the RSLogix 5000 project and download it to your Logix5000 controller.
This example uses the name PFlex70_Drive_on_DeviceNet_quick_start.acd
8. Go offline but leave the RSLogix 5000 project open.
IMPORTANT If you skipped step 1 … step 4
because you already created an
RSLogix 5000 project for your
Logix5000 controller, verify that
the project is open and you have
accessed the scanner module’s
RSNetWorx configuration tab.