Rockwell Automation Logix5000 Control Systems: Connect a PowerFlex 70 Drive over DeviceNet Quick Start - Manual (Page 30)

30 Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012
Chapter 2 Create DeviceNet Network Software Files
4. Record the following information
about the scanner module:
– Slot number in the
CompactBus = 1
– DeviceNet network node
number = 0
5. Click OK.
6. Click OK when the alert about
uploading or downloading device
information appears.
RSNetWorx for DeviceNet
software browses the network and
shows the scanner module at
DeviceNet network node 0 and
the drive at node 1.
TIP Once the software browses
the DeviceNet network to
recognize the two nodes
installed while completing
the tasks described in this
quick start, you can click
Cancel and the browse
function ends.
Slot number = 1
DeviceNet network
node number = 0