Rockwell Automation Logix5000 Control Systems: Connect a PowerFlex 70 Drive over DeviceNet Quick Start - Manual (Page 28)

28 Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012
Chapter 2 Create DeviceNet Network Software Files
7. If you receive a linking device
warning, click Yes.
The Node Commissioning dialog
box is populated with the
1769-SDN module’s current
settings.
8. Enter a node address of 1 for the
1769-SDN scanner module and
click Apply.
The Address is applied and is
confirmed in the Messages box.
9. Record the node address.
10. Click Close.