Rockwell Automation Logix5000 Control Systems: Connect a PowerFlex 70 Drive over DeviceNet Quick Start - Manual (Page 31)

Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012 31
Create DeviceNet Network Software Files Chapter 2
7. Right-click the scanner module
and choose Properties.
8. Click the Module tab.
9. Click Download.
All configuration is cleared from
the scanner module, and the
software is synchronized with
the module.
IMPORTANT
If you receive a fault message on your PowerFlex 70 drive, press on the keypad to clear the fault.