Rockwell Automation Logix5000 Control Systems: Connect a PowerFlex 70 Drive over DeviceNet Quick Start - Manual (Page 22)

22 Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012
Chapter 2 Create DeviceNet Network Software Files
• These tasks described in Chapter 1, Prepare the PowerFlex 70 Drive Hardware on page 13 :
– Mount the Drive
– Wire Power to the Drive
– Set the Node Address and Communication Rate
– Connect the DeviceNet Adapter to the Drive
– Connect the Drive to the DeviceNet Network
What You Need
You need RSNetWorx for DeviceNet software to complete the tasks in this chapter.
Follow These Steps
Set the 1769-SDN
Scanner Module’s
Node Address
page 26
Register an EDS
File - Optional
page 23
Associate the
DeviceNet
Configuration File
with an RSLogix
5000 Project
page 29
Create a
DeviceNet
Scanlist
page 35
Create a
DeviceNet
Configuration File
page 29