Rockwell Automation Logix5000 Control Systems: Connect a PowerFlex 70 Drive over DeviceNet Quick Start - Manual (Page 50)

50 Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012
Chapter 3 Use a PowerFlex 70 Drive in an RSLogix 5000 Project
8. Change the O.Stop tag to 1.
The display on the drive shows a
speed decrease until the drive
reaches 0.00 Hz.
9. Change the Stop tag back to 0.
10. Select Go Offline.
By starting and stopping the drive, you
verified the following:
• The controller is correctly communicating with the drive.
• The drive can receive simple commands.