Rockwell Automation Logix5000 Control Systems: Connect a PowerFlex 70 Drive over DeviceNet Quick Start - Manual (Page 49)

Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012 49
Use a PowerFlex 70 Drive in an RSLogix 5000 Project Chapter 3
5. Change the
Local_DeviceNet_scanner_N01_
POL_O.Reference tag to 15000.
This value is the speed to which
your drive accelerates.
6. Change the
Local_DeviceNet_scanner_N01_
POL_O.Start tag to 1.
The display on the drive registers
the speed increase in Hertz until the value entered at the reference tag is reached.
7. Change the O.Start tag back to 0.