Rockwell Automation Logix5000 Control Systems: Connect a PowerFlex 70 Drive over DeviceNet Quick Start - Manual (Page 44)

44 Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012
Chapter 3 Use a PowerFlex 70 Drive in an RSLogix 5000 Project
Create DeviceNet Tags
1. Launch the DeviceNet Tag Generator tool.
2. Select your RSLogix 5000 project
and click Select Scanner.
3. Select the 1769-SDN scanner
module that scans the network
where the device is located and
click Select RSNetWorx Project.
IMPORTANT Before running the DeviceNet Tag Generator, verify the following:
• RSNetWorx for DeviceNet software is closed.
• RSLogix 5000 project is open and offline.