Download the project, Download the, Project – Rockwell Automation Logix5000 Control Systems: Connect a PowerFlex 70 Drive over DeviceNet Quick Start User Manual
Page 47
Advertising
![background image](/manuals/581136/47/background.png)
Rockwell Automation Publication IASIMP-QS030A-EN-P - July 2012
47
Use a PowerFlex 70 Drive in an RSLogix 5000 Project Chapter 3
Download the Project
1.
Save your RSLogix 5000 project.
2.
Verify that the controller’s mode
switch is in the PROG position.
3.
Click the Controller Status icon
and choose Download.
4.
On the Download dialog box,
click Download.
The project downloads to
the controller.
IMPORTANT
If you receive a fault
message on your
PowerFlex 70 drive, press
on the keypad to
clear the fault.
RUN
REM
PROG
Advertising