Rockwell Automation RECOMM-232 Serial Converter for use with DPI AC Drives - Manual (Page 20)

4-4 Serial Converter for use with DPI AC Drives
Step 4. In the Name box, type any name (for example, converter),
and then select any icon in the Icon box.
Step 5. Click OK to display the Phone Number dialog box.
Step 6. In the Connect Using box, select the communications port
that you intend to use (usually COM1 or COM2).
Step 7. Click OK to display the Properties dialog box.
Step 8. Select the settings shown in figure 4.6.
Important: If you have previously set DF1 Rate Cfg (03) to 19.2K
or 38.4K, select that value in the Bits per second box.
Figure 4.4 – Connection Dialog Box