Hapter, Troubleshooting the serial converter – Rockwell Automation RECOMM-232 Serial Converter for use with DPI AC Drives User Manual
Page 27
Advertising
Troubleshooting the Serial Converter
5-1
C
HAPTER
5
Troubleshooting the Serial Converter
Chapter 5 provides information to troubleshoot the serial converter.
5.1
Understanding the Status Indicators
The serial converter reports its status using status indicators. See
figure 5.1.
Sections 5.1.1 through 5.1.3 describe what the state of each
indicator means. Note that if all status indicators are off, the serial
converter is not receiving power. Refer to chapter 3 for installation
instructions.
#
Status
Indicator
Description
Refer To
1
Diamond
Serial converter status section 5.1.1
2
TX
Serial converter is
transmitting data
section 5.1.2
3
RX
Serial converter is
receiving data
section 5.1.3
Figure 5.1 – Status Indicators on the Serial Converter
AB
1
2
3
Advertising