Rockwell Automation RECOMM-232 Serial Converter for use with DPI AC Drives - Manual (Page 22)

4-6 Serial Converter for use with DPI AC Drives
Step 14. Click OK to display the HyperTerminal workspace.
Step 15. Select File > Save to save the HyperTerminal
configuration that you just created. In future connections,
you can select the saved configuration and quickly connect
to the serial converter.
Step 16. Press Enter until the main menu appears (see figure 4.8).
Figure 4.6 – Converter Properties Dialog Box
Figure 4.7 – Hyperterminal Main Menu
To do this: See page(s):
Edit the serial port rate or fault action 4-7 through 4-10
View the event queue 5-3
View DF1 data 4-6
Update the firmware C-1
Main Menu - Enter Number for Selection
1> Display Setup Parameters
2> Display Event Queue
3> Flash Upgrade