Rockwell Automation RECOMM-232 Serial Converter for use with DPI AC Drives - Manual (Page 33)

Troubleshooting the Serial Converter 5-7
5.4.2 To Clear DF1 Data
Step 1. Access the parameters in the serial converter using a
configuration tool. Refer to section 3.1.
Step 2. Set the value of Clear DF1 Counts (06) to Clear Counts,
and then press Enter to clear the DF1 data. See figure 5.5.
Figure 5.5 – Clearing DF1 Data
Press the UP ARROW or DOWN ARROW key to scroll
through the parameter list. Press the LEFT ARROW or
RIGHT ARROW key to modify parameter values. Press
the ENTER key to save a new value.
6> Clear DF1 Counts = Clear Counts