Rockwell Automation RECOMM-232 Serial Converter for use with DPI AC Drives - Manual (Page 45)

Flash Updates C-3
Step 2. If the flash can be completed safely, type Y. The letter “C”
repeatedly appears. It is the Xmodem prompt and continues
to appear until you send a binary file.
Important: Press Ctrl + X to cancel a flash update procedure.
Step 3. Select Transfer > Send File to display the send file dialog
box. See figure C.2.
Step 4. Click Browse and navigate to the flash file.
Step 5. Double-click the file. Its name appears in the Filename box.
Step 6. In the Protocol box, select Xmodem.
Step 7. Click Send. A dialog box appears and reports the progress
of the download. When it is complete, the message
“Operation Complete” appears.
Important: Keep the device powered for 15 seconds after the
operation has completed.
Step 8. Press Enter to return to the main menu.
Figure C.2 – Send File Dialog Box
RECOMM232.bin