Metrohm tiamo 2.3 (process analysis) - Manual (Page 1232)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1216 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
730, 778, 789, 814, 815, 855, 864
Range
0 ... 235 mm
Selection Work position | Shift position | Rinse position |
Special position | Home position
Default value Work position
774
Range
0 ... 100 mm
Selection Work position | Shift position | Rinse position |
Special position | Home position
Default value Work position
874
Range
0 ... 110 mm
Selection Work position | Shift position | Rinse position |
Special position | Home position
Default value Work position
Note
Please make sure that none of the lift positions exceed the maximum
stroke path given in the tower properties of the device.
Parameters
Lift rate
Selection of the speed for moving the lift.
778, 789, 814, 815, 855, 864, 874
Range
5 ... 25 mm/s
Default value 25 mm/s
730
Range
3 ... 25 mm/s
Default value 25 mm/s
774
Range
3 ... 12 mm/s
Default value 12 mm/s