7 general - pwm controller – Metrohm tiamo 2.3 (process analysis) User Manual
Page 1645
Advertising
■■■■■■■■■■■■■■■■■■■■■■
7 Instruments
tiamo 2.3 (for Process Analysis)
■■■■■■■■
1629
Output parameters
Output slope
for control task = pump control
Range
-214783647.000 ... 214783647.000
Default value
1
for control task = free controller
Range
-214783647.000 ... 214783647.000
Default value
1
Output offset
for control task = pump control
Range
0% mapping of the output ... 100% mapping
of the output 'Mapping unit of the output'
Default value
0% mapping of the output 'Mapping unit of
the output'
for control task = free controller
Range
0% mapping of the output ... 100% mapping
of the output 'Mapping unit of the output'
Default value
0% mapping of the output 'Mapping unit of
the output'
7.20.8.1.7
General - PWM controller
Advertising