Metrohm tiamo 2.3 (process analysis) - Manual (Page 1644)

7.20 IO controller ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1628 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
of the actuating variable which a PD controller causes immediately as a
result of the D component.
for control task = pump control
Range
0 ... 9999.0
Default value 0.0
for control task = free controller
Range
0.0 ... 9999.0 s
Default value 0.0 s
Attenuation time
for control task = pump control
Range
0.0 ... 9999.0
Default value 0.0
for control task = free controller
Range
0.0 ... 9999.0 s
Default value 0.0 s
D in feedback path
on | off (Default value: off)
Upper limit
Upper limit value at which the integration is stopped and the output is
limited.
Range 0% mapping of the output ... 100% mapping
of the output 'Mapping unit of the output'
Default value 100% mapping of the output 'Mapping unit
of the output'
Lower limit
Lower limit value at which the integration is stopped and the output is
limited.
Range 0% mapping of the output ... 100% mapping
of the output 'Mapping unit of the output'
Default value 0% mapping of the output 'Mapping unit of
the output'
ARW only with I component
on | off (Default value: off)