Metrohm tiamo 2.3 (process analysis) - Manual (Page 94)

2.4 Formula editor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
78 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
2.4.4.7 Type Conversion functions
2.4.4.7.1 NumberToText
Dialogfenster: Formula editor ▶ Operators/Functions
Syntax
y = NumberToText(number)
Returns the entered number as Text.
Parameters
Number
The parameter can be indicated either directly as a number or as a variable
of the type Number.
Examples
NumberToText(-55.3) = -55.3
NumberToText('CV.AverageTemp') = Vale of the common variable
(AverageTemp) as Text
2.4.4.7.2 NumberToTime
Dialogfenster: Formula editor ▶ Operators/Functions
Syntax
y = NumberToTime(number)
Returns the entered number as Date/Time, whereby the number is inter-
preted as the number of days since December 30, 1899 at 01 hours.
Parameters
Number
The parameter can be indicated either directly as a number or as a variable
of the type Number.
Examples
NumberToTime(35545.526) = 1997-05-25 14:37:26 UTC+2
(dependent on the system time)
NumberToTime(35780.55) = 1997-12-16 14:12:00 UTC+1 (depend-
ent on the system time)
NumberToTime('CV.TestDate') = Value of the common variable (Test-
Date) as Date/Time