Metrohm tiamo 2.3 Manual User Manual
Page 1103
Advertising
■■■■■■■■■■■■■■■■■■■■■■
5 Method
tiamo 2.3
■■■■■■■■
1087
The calibration can be carried out with both manual and automatic solu-
tion changes with the aid of a Sample Processor.
Commands
The following commands can be selected for calibration:
■
CAL Cond
Measurement of conductivity standards for the determination of the
cell constant of conductivity measurement cells.
■
CAL Spec
Measuring command for wavelength calibration.
■
CAL LOOP Conc
Calibration loop for the calibration of ion-selective electrodes (ISE elec-
trodes).
Advertising