Metrohm tiamo 2.3 Manual User Manual
Page 198
3.8 Subwindow Live display
■■■■■■■■■■■■■■■■■■■■■■
182
■■■■■■■■
tiamo 2.3
MEAS TMF
Selection
Time | Measured value | Transmission | Tem-
perature | dMW/dt | off
Default value
off
KFT
Selection
Time | Measured value | Volume | dV/dt | Tem-
perature | Calculated 1...3 | External 1...3 | off
Default value
off
KFC / BRC
Selection
Time | Measured value | Quantity | Charge |
Drift | Ugen | Igen | Temperature | Calculated
1...3 | External 1...3 | off
Default value
off
STAT
Selection
Time | Measured value | Volume | dV/dt | Tem-
perature | Calculated 1...3 | External 1...3 | off
Default value
off
DOS
Selection
off | Measured value | Time | Temperature |
Volume | dV/dt | Calculated 1...3 | External
1...3
Default value
off
TET
Selection
Volume | Measured value | Time | Calculated
1...3 | External 1...3 | off
Default value
off
Curve display
on | off (Default value: off)
If this option is activated the curves required are displayed in the sub-
window Live display.
x axis
Selection of the quantity shown on the x axis.
DET
Selection
Volume | Measured value | Time | Temperature
| ERC | Calculated 1…3 | External 1…3
Default value
Volume