Metrohm tiamo 2.3 Manual - Manual (Page 796)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
780 ￭￭￭￭￭￭￭￭ tiamo 2.3
Commands
Depending on the measured value, one of the following two KFT com-
mands can be chosen:
￭ KFT Ipol
Voltametric measurement with selectable polarization current (meas-
ured quantity voltage U).
￭ KFT Upol
Amperometric measurement with selectable polarization voltage
(measured value current I).