Metrohm tiamo 2.3 Manual - Manual (Page 1579)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Instruments
tiamo 2.3 ￭￭￭￭￭￭￭￭ 1563
Set to work
Shows the date on which the device was automatically added to the
device table.
Data storage under legal control
Indicates whether the balance has its own data storage under legal con-
trol.
Only visible and editable with Sartorius balances
Selection
on | off
Default value off
Remarks
Remarks about the device.
Input 1000 characters
Default value empty
7.17.3 Properties - RS-232
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ RS-232
The properties of the RS-232 interface are defined on this tab.
COM Port
Selection of the serial interface on the PC to which the device is connec-
ted.
Selection COM1 | COM2 | … | COMn
Default value COMn
COMn
First free COM port.
Baud rate
Transmission rate. The baud rate selected here must also be set on the
device itself.
Selection 300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 |
38400 | 57600 | 115200
Default value 9600
Data bit
Number of data bits.
Selection 7 | 8
Default value 8