Metrohm tiamo 2.3 Manual User Manual
Page 298
4.4 Templates
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
282
￭￭￭￭￭￭￭￭
tiamo 2.3
<crCalibOptDataCalibRangeTo
val="" />
Maximum concentration of the calibration range.
<crCalibOptDataCalibRangeUnit
val="" />
Unit of the calibration range.
<crCalibOptDataCalibTime
val="" />
Calibration date.
<crCalibOptDataCalibMethod
val="" />
Calibration method.
<crCalibOptDataDetermID
val="" />
Determination ID.
<crCalibOptDataUser val="" />
User.
– <crCalibOptTable>
Calibration solutions.
– <header>
Column headers.
<<RowDesc val="" />
Column header of the standards.
<ConcVal val="" />
Column header for the concentration value.
<MeasVal val="" />
Column header for measured value.
<CalTemp val="" />
Column header for calibration temperature.
<CalDur val="" />
Column header for duration of measurement.
<header>
– <body dynamic="">
– <data>
<RowDesc> ... </RowDesc>
Buffer/Standard.
<ConcVal> ... </ConcVal>
Concentration value.
<MeasVal> ... </MeasVal>
Measured value.
<CalTemp> ... </CalTemp>
Calibration temperature.
<CalDur> ... </CalDur>
Duration of measurement in s.
</data>
</body>
</crCalibOptTable>
– </CalibOptData>
– <StdAddData>
Standard addition data
<slope val="" />
Calculated slope of the standard addition curve.
<e0 val="" />
Calculated axis intercept of the standard addition curve.