Metrohm tiamo 2.3 Manual - Manual (Page 32)

1.10 What is new in tiamo 2.3? ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭ tiamo 2.3
￭ A crash could be caused when creating common and global variables if
one had selected Text or Date/Time as the type and then pressed on
the tab Limits.
￭ Intelligent units (dosing units, exchange units and sensors) which were
still connected could be overwritten during importing.
￭ If the password was modified directly from the login dialog, then
"zero" was entered as the full name in the audit trail.
￭ In the device configuration of the Avantes spectrometer, the field Sen-
sitivity on the tab Settings could be edited, even though the device
was not connected.
￭ If one wished to delete the entries after the archiving of a large audit
trail (e.g. with more than 100,000 entries), this would take a very long
time.