Metrohm tiamo 2.3 Manual - Manual (Page 449)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 ￭￭￭￭￭￭￭￭ 433
5.5.2.5 Exit track
Subwindow: Method
An exit track is a track that can be created manually with Paste ▶ New
track... ▶ Exit track or with the icon . It starts with the start com-
mand (see Chapter 5.6.2.6, page 452) and finishes with a end command
(see Chapter 5.6.2.8, page 454). Only one exit track can be inserted per
method.
The exit track is executed as soon as all normal tracks and the main
track have finished or if the determination has been stopped manually. If
a new exit track is created, then a (see Chapter 5.6.8.4, page 1246)
command and a (see Chapter 5.6.8.3, page 1244) and a REPORT com-
mand will be automatically inserted into this track. With these commands
it can be guaranteed that a database entry and a report are created for
each determination, even if the determination has been stopped either
manually or due to an error.
5.5.2.6 Error track
Subwindow: Method
An error track is a track that can be created manually with
Paste
▶ New track... ▶ Error track or with the icon . It begins with
a start command (see Chapter 5.5.2.6, page 433) and finishes with an
end command (see Chapter 5.6.2.8, page 454). Only one error track can
be inserted per method.