11 oxy fuel lifter wiring ac, 12 oxy fuel lifter wiring dc, Oxy fuel lifter wiring ac -16 – Tweco iCNC XT User Manual
Page 36: Oxy fuel lifter wiring dc -16, Icnc xt
Advertising
iCNC XT
3-16
INSTALLATION
Manual 0-5299
3.11 Oxy Fuel Lifter Wiring AC
By default the output connector will provide inlet voltage outputs.
See previous page for voltage selection jumpers..
3.12 Oxy Fuel Lifter Wiring DC
You can provide your own DC voltage to pins #2 and #8. The relay logic will then swap the polarity of the voltage going into the lifter motor. If
the lifter moves up when you press down from the switch and vice versa, just swap the wires in pins #4 and #6. Max output rating 48VDC/4A.
Advertising