5 xt2 switch description and function, Xt2 switch description and function -12, Icnc xt – Tweco iCNC XT User Manual
Page 70
Advertising
iCNC XT
5-12
OPERATION
Manual 0-5299
5.5 XT2 Switch Description and Function
5.5.1 XT2 Switches and Descriptions
Floating Head Switch
• ON position will activate the Floating Head Output.
• AUTO position allows the plasma cutting signal from a program to run the plasma.
• OFF position will prevent activating the Floating Head.
Plasma Switch
• ON position will activate the Plasma Output.
• AUTO position allows the plasma cutting signal from a program to run the plasma.
• OFF position will prevent activating the plasma.
IHS Switch
• ON position will activate the IHS Output.
• AUTO position allows the IHS signal from a program to run the plasma.
• OFF position will prevent activating the IHS.
Up / Down switch
Move torch Up/Down
Advertising