Tweco iCNC XT - Manual (Page 61)

iCNC XT
Manual 0-5299 OPERATION 5-3
5.2 Overview Main Screen
The main screen is divided into three parts.
• Info (Systems Status)
• Promotion Cut – Next Job Preview
• Current Job
5.2.1 Info (System Status)
Th is is located on top of the screen. The info screen shows system information and is used for diagnostics and troubleshooting.
• Speed IPM (or metric) indicates machine speed.
• X & Y readouts indicate absolute position of the cutting tool.
• Speed Bar in %. This is interfaced directly with the Speed Potentiometer and will refl ect the speed pot setting.
• Jogging direction indicator. Monitors and shows which direction/jogging key is pressed.
• Operational Panel – Interfaced with the 8-10 push buttons. Monitors which button is pressed or activated.
• System Running – Indicates that the second CPU is activated and functionally properly.