15 unlocking the hard drive, Unlocking the hard drive -19, Icnc xt – Tweco iCNC XT User Manual
Page 39
Advertising
iCNC XT
Manual 0-5299
INSTALLATION
3-19
9. Check the box “Disable servo failure detect”.
3.15 Unlocking the Hard Drive
NOTE
The system will reboot during the locking and unlocking of the Hard Drive.
1. Select Option 8. NOTE - the button will indicate the current Hard Drive status.
2. Select option 8.1 “Change Status”.
3. Select “Unlock”
4. Select “Close”.
Advertising