LaMotte LTC3000wi Turbidity & Chlorine Lab Meter - Manual (Page 79)

 The Keypad
This button will scroll up through a list of menu selections.
ENTER
The button is used to select choices in a menu viewed on
the display.
This button controls the backlight on the display.
This button will scroll down through a list of menu
selections.
EXIT
This button exits to the previous menu.
This button turns the meter on or off.
EXIT
ENTER
 THE DISPLAY & MENUS
The display allows menu selections to be viewed and selected. These
selections instruct the LTC3000we/wi to perform specifi c tasks. The
menus are viewed in the display using two general formats that are
followed from one menu to the next. Each menu is a list of choices or
selections.
The display has a header line at the top and a footer line at the bottom.
The header displays the title of the current menu. The footer line
displays the time and the date, the data logger status and the battery
status. The menu selection window is in the middle of the display
between the header and the footer.
The menu selection window displays information in two general formats.
In the fi rst format only menu selections are displayed. Up to 4 lines of
menu selections may be displayed. If more selections are available they
can be viewed by pressing the arrow buttons to scroll the
other menu selections into the menu selection window. Think of the
menu selections as a vertical list in the display that moves up or down
each time an arrow button is pressed. Some menus in the
LTC3000we/wi are looping menus. The top and bottom menu choices
79