Cod–high range – LaMotte SMART Spectro Spectrophotometer User Manual

Page 114

Advertising
background image

COD–HIGH RANGE

MERCURY FREE DIGESTION • Code 0074-SC
MERCURY DIGESTION • Code 0077-SC

QUANTITY

CONTENTS

CODE

25

* COD High Level Mercury Free Tubes

*0074-SC

or 25

* COD High Level Mercury Tubes

*0077-SC

*WARNING: Reagents marked with a * are considered to be potential health hazards. To view
or print a Material Safety Data Sheet (MSDS) for these reagents see MSDS CD or
www.lamotte.com. To obtain a printed copy, contact LaMotte by e-mail, phone or fax.

COD High Level Mercury Free Tubes and COD High Level Mercury Tubes are
not USEPA approved.
þNOTE: These reagents are for use with the SMART Spectro version 1.5 or

higher.

Equipment needed but not supplied:

QUANTITY

CONTENTS

CODE

1

COD Adapter

5-0087

1

COD Reactor, 12 vial, 110V

5-0102

or 1

COD Reactor, 12 vial, 230V

5-0102-EX2

1

Measuring Pipet, 1.0 mL

2-2110

1

Pipet Bulb

2-2164

Chemical Oxygen Demand (COD) is a measure of the amount of organic
matter in water which is susceptible to oxidation by chemical oxidants. COD
can be empirically related to the Biological Oxygen Demand (BOD) and
organic carbon content of a specific source of water. This correlation must be
determined experimentally for each source of water.

APPLICATION:

Domestic and industrial wastes.

RANGE:

0–15,000 mg/L COD

METHOD:

Dichromate in the presence of silver salts, at high
temperature in a closed system, oxidizes most organic
compounds to 95-100% of the theoretical amount. This
process is called digestion. As dichromate oxidizes the
organic compounds, a green complex is formed. The
concentration of the green complex is measured at 605 nm
and is directly proportional to the COD of the sample.

SAMPLE
HANDLING &
PRESERVATION:

Collect samples in glass and test as soon as possible. If
samples must be stored, preservation is accomplished by the
addition of concentrated H

2

SO

4

to adjust the pH below 2.

Samples with suspended solids should be homogenized in a
blender (100 mL for 30 seconds) and then stirred gently with
a magnetic stirrer.

SMART SPECTRO TEST PROCEDURES 03.05

COD–HR 1/4

Advertising