Quick start, The main menu screen will appear automatically, Press t until the q is next to programmed tests – LaMotte SMART Spectro Spectrophotometer User Manual
Page 21: The all tests menu will appear, Continued next page
n
QUICK START
Some quick instructions to get into testing.
1. Press
ON to turn on the SMART Spectro.
The WELCOME screen will appear for about 2
seconds.
LAMOTTE
SMART
Version 1.0
May 2000
2. The MAIN MENU screen will appear
automatically.
MAIN MENU 12:45
* CALIBRATE WL
PROGRAMMED TESTS
%T/ABS
3. Press
t until the Q is next to PROGRAMMED
TESTS
.
MAIN MENU 00:00
CALIBRATE WL
* PROGRAMMED TESTS
%T/ABS
4. Press
ENTER/Q to select PROGRAMMED
TESTS. PROGRAMMED TESTS
menu will
appear.
PROGRAMMED TESTS
* SEQUENCE 1
SEQUENCE 2
SEQUENCE 3
5. Press
t until the Q is next to ALL TESTS.
Press
ENTER/Q .
PROGRAMMED TESTS
SEQUENCE 2
SEQUENCE 3
* ALL TESTS
6. The ALL TESTS menu will appear.
ALL TESTS
* 1 Aluminum
2 Alkalinity-TT
3 Ammonia-N-L F
7. Press
s or t to move the Q next to the
desired test.
ALL TESTS
13 CA Hard - UDV
14 Carbohydrazine
* 15 Chlorine
Continued next page...
SMART SPECTRO SPECTROPHOTOMETER 05.04
21