LaMotte SMART Spectro Spectrophotometer - Manual (Page 28)

n
GENERAL TESTING PROCEDURES
The following are some step by step examples of how to run tests from the
PROGRAMMED TESTS
menu. These test procedures are designed to be used with
LaMotte SMART Spectro reagent systems.
n
TESTING WITH THE LaMOTTE PROGRAMMED TESTS
Scroll to ALL TESTS with the
t button in the
PROGRAMMED TESTS menu.
Press the
ENTER/Q button to select ALL
TESTS
.
PROGRAMMED TESTS
SEQUENCE 2
SEQUENCE 3
* ALL TESTS
Press
ENTER/Q button to select 1 Aluminum. ALL TESTS
* 1. Aluminum
2. Alkalinity-TT
3. Ammonia-N L F
:
:
125 User Test 25
END OF LIST
The SMART Spectrophotometer is ready to
scan; the correct wavelength has been selected.
Place the blank in the sample chamber and press
the
ENTER/Q button one time to scan blank
(Note: do not keep the button depressed). The
spectrophotometer will scan and store the blank
and the * will be positioned next to SCAN
SAMPLE
.
1 Aluminum
* SCAN BLANK
SCAN SAMPLE
END 535NM
Place the reacted sample in the chamber and
press the
ENTER/Q button to scan the sample.
The spectrophotometer will scan the sample and
the results screen will appear.
1 Aluminum
SCAN BLANK
* SCAN SAMPLE
END 535NM
Continued on next page ...
28 SMART SPECTRO SPECTROPHOTOMETER 05.04