SARGENT BT- Beacon - Manual (Page 3)

A7974C 3
02/01/13
Copyright © 2009 Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
Beacon Exit Device
Installation and Wiring Instructions
FOR INSTALLATION ASSISTANCE CONTACT SARGENT • 1-800-810-WIRE (9473) • www.sargentlock.com
Fig. 1 BEACON Exit Device
SECTION I: OVERVIEW
1. Description
Part of the ASSA ABLOY LiteGuide family of products, the Beacon exit device provides both
audible and visible alerts to enhance the visibility of exit locations in dark or smoke-filled
passages and is intended as a supplement to existing codes for emergency egress lighting
and direction.
Connected to the building’s alarm system, an activated Beacon emits pulsing light followed by
an audible message declaring “Exit located here” in single or multiple languages. A highly visible
green laser light cone combined with the pulsing LEDs draws people directly to the exit.
• TL- (SARGuide): Illuminated touchpad for 80 Series exit devices.
White
High-Intensity
LED Speaker
Green
Ready-State
LED
Green
Laser
Amber
Diagnostic
LED
Cylinder White
High-Intensity
LED
The SARGENT Beacon (BT-) Exit Device is compatible with the following prefix:
Innovative design protected by
U.S. Patent Nos. 7,839,265 & 7,528,700