ClearOne NetStreams DigiLinX Dealer - Manual (Page 148)

DigiLinX Dealer Setup Version 2.35.00
5-78
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
10. Select the IR tab. IR information displays (see Figure 5-62).
Figure 5-65 IR tab
Table 5-50
IR/KeyLinX Tab
Tab Selection Description
KeyLinX Enable Service Enables or disables functionality.
Model Number Select the model number of the KeyLinX, IRLinX, or KeyLinX
and IRLinX from the dropdown list.
Active Button Intensity How bright the backlighting of the buttons on the KeyLinX
are when in an active state.
Inactive Button Intensity How bright the backlighting of the buttons on the KeyLinX
are when KeyLinX is inactive.
Inactive Timeout How long after the last button was pressed before the
KeyLinX becomes inactive and the button lights change to
the Inactive levels.
BackLight LED Allows you to disable the backlight.
Service Name A display field used to identify the stream name.
Carrier Frequency Choose the IR frequency to be used. Selections are 30, 33,
36, 37, 38, 40, and 50.
KeyLinX Source Buttons You can designate which Source button is assigned to what
source. For each KeyLinX Source button (Src1, Src2...), use
the dropdown list to designate what source that button
selects.
Download Firmware If you need to download the latest version of firmware for the
KeyLinX, refer to Downloading KeyLinX Firmware on page
12-5.
Reset KeyLinX If you need to reset the KeyLinX, refer to Resetting the
KeyLinX on page 12-6.