Updating streamnet devices, Updating streamnet devices -3 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 61
Matching Devices
4-3
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 4-3
Update StreamNet Devices screen
Updating StreamNet Devices
1.
If you haven’t yet updated the firmware to the devices, select the latest Firmware
Version from the dropdown list in the Firmware Version field; otherwise, go to step
4.
2.
Select individual devices or use the Select All button to select all devices to be
upgraded.
Devices to be updated are highlighted in green.
Tip: You may not want to
check Include XM Station Art
every time you update
devices. This feature updates
metadata for Polk IP speakers
attached to a MediaLinX and
may take quite a bit of time to
load. To skip the update of
XM Station Art, uncheck the
box next to Include XM Station
Art.
3.
Select Update Devices from the lower right-hand corner of the window.
The devices run through several phases of updating. Each device is restarted. Set
aside more time for larger systems. For especially large systems, devices are
updated ten at a time.
When all devices have been upgraded, you will see “Done” in the status column for
each device (see Figure 4-4).