Mla4000 input sensors tab, Mla4000 input sensors tab -26 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 96
DigiLinX Dealer Setup Version 2.35.00
5-26
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 5-22
MediaLinX MLA4000 Source tab
The Slots tab displays each slot on the MLA4000 and shows the assigned device type. Slots 1-4 can be
assigned to function as a MediaLinX 101 or as a ControLinX. Slot 5 is a dedicated ControLinX.
2.
You can change information on the Slots page. If you change any of the slot assignments, Dealer Setup will
ask for a service type such as a tuner for a MediaLinX or driver such as Lutron Radio RA for a ControLinX.
After adjusting information on the Slots page, select Apply.
MLA4000 Input Sensors Tab
You would use the Input Sensors tab if you are connecting the MediaLinX MLA4000 to a Doorbell/Telephone
Mute interface. The Input Sensor tab is used to configure how the input sensor is triggered and how it behaves.
1.
Select the Input Sensors tab.The Input Sensor tab for the MediaLinX MLA4000 displays in the right side of
the window. Figure 5-23 shows the Input Sensors page.