Intercom groups, Intercom groups -4 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 330
DigiLinX Dealer Setup Version 2.35.00
18-4
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
2.
Select Apply to apply any changes.
Intercom Groups
The Intercom Groups tab shows the intercom groups associated with a selected room
room.
1.
Select the Intercom Groups tab.
The Intercom Groups screen displays (see Figure 18-6). On the left side are the
Available Groups (groups you can choose from to build this menu). The Intercom
Groups show you which groups are currently activated for that room.
Figure 18-4
Intercom Groups screen
2.
You can:
Select a room in Available Groups, click the right arrow, and move it to the
right column so that the intercom group is enabled for that room.
Select a room that is currently being monitored in the Intercom Groups column
and click the left arrow to move it to the Available Groups so that the intercom
group is disabled for that room.
Advanced Options
Includes the following options:
Enable Intercom for All Rooms - enables monitoring and
incoming calls for all rooms.
Disable Intercom for All Rooms - disables monitoring and
incoming calls for all rooms.
Table 18-1
IP Intercom Advanced Options
Screen
Selection Description