ClearOne NetStreams DigiLinX Dealer - Manual (Page 45)

Creating and Saving Projects
3-9
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Entering ViewLinX Information
1. Enter the following information:
ˆ Room Name. Edit or keep the default
ˆ Model Number. There is only one model number to select.
ˆ Video Output. Select from Component, Component SD only, Composite, S-
Video, VGA, or Wide XGA. If using high definition Component, select
Component. If using standard definition Component, select Component SD
only.
2. Complete the information for each ViewLinX in your project.
3. Select Save & Continue.
The MediaLinX device information window displays (see Figure 3-9).
Figure 3-9 MediaLinX device information window
Entering MediaLinX Information
1. Enter the following information:
ˆ Source Name. Edit or keep the default. This name appears in the graphical user
interface.
ˆ Model Number. Select the model number of the MediaLinX product you're
installing from the dropdown list (using the down arrow key) to select the
correct model number for this device. The MediaLinX MLA101 converts from
one legacy source. The MediaLinX MLA4000 converts the audio of up to four
legacy sources. It has four definable slots, with each slot capable of functioning
as an MLA101 or ControLinX CL100. A fifth channel provides a dedicated
CL100. If you choose an MLA4000, skip to step 3.
NOTE: If you are integrating a Polk Audio
®
XM Tuner, Parasound ZTuner, or iPort™
with the system, a MediaLinX MLA101 or MLA4000 is required.
ˆ Source Type. Use the dropdown list (using the down arrow key) to select what
type of source this is. The source type brings up the appropriate controls for the
source. There are several types of sources: a Tuner, CD player, DVD player,
Personal Video Recorder, XM Tuner, Parasound ZTuner, or iPort.