Entering touchlinx information, Entering touchlinx information -13 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 49
Creating and Saving Projects
3-13
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Entering TouchLinX Information
1.
Enter the following information:
Room Name. Assign a room name from the dropdown list for each room using
a TouchLinX.
Model Number. Select from the dropdown list (using the down arrow key) to
choose the correct model number for this device.
BackLight Timeout. To automatically turn off the TouchLinX backlight, select
from the dropdown list (using the down arrow key) to choose the amount of
time before the backlight turns off.
NOTE:
You can also select Always On to leave the backlight on continuously. Your
customer can change these settings on any TouchLinX installed from the user
interface on the TouchLinX.
Backlight Intensity. You can adjust the brightness of the backlight by clicking
and dragging the backlight intensity indicator left or right.
Lighting Control Only. Select this checkbox if the TouchLinX will be used for
lighting control only.
2.
Select Save & Continue.
Complete the configuration for all TouchLinX devices. After finishing the last
TouchLinX, you will be prompted for information for ControLinX devices (if any).
See Figure 3-14.
Figure 3-14
ControLinX dialog box