Bio-Rad Gene Pulser Xcell™ Electroporation Systems - Manual (Page 26)

User Protocols screen
Fig. 3.10. User Protocols screen. This is an example of the first User Protocols screen. Toggle
between this screen and the second screen with Protocols 7–12 using the Left and Right Arrow
keys. When purchased, the initial User Directory screen will have only numbers without any
names.
3.3.6A Saving a protocol in a location without a named User Protocol entry
• With a User Protocols screen displayed on the LCD, press 1–12 or use the Up, Down, Left, and
Right Arrows to highlight a User Protocol without an entry (e.g., positions 4, 5, or 6 on the screen
in Figure 3.10).
• Press Enter to select the position.
• Type in the name using the alpha-numeric keypad (alphabetic entries are the default; press Shift to
toggle between alphabetic and numeric entries; the maximum length is 10 characters; to use the
same key twice, advance the cursor using the Right Arrow Key, spaces are not allowed). Press
Save or Enter. The protocol is saved in the location named on the User Protocols screen.
• To use the saved protocol, press Enter to view the Protocol Detail screen. Press the Pulse button
to deliver a pulse.
3.3.6B Saving a protocol in a location with a named User Protocol entry
• With a User Protocols screen displayed on the LCD, press 1–12 or use the Up, Down, Left, and
Right Arrows to highlight a User Protocol with a named entry (e.g., positions 1, 2, or 3 on the
screen in Figure 3.10).
• Press Enter to select the position.
• A Warning screen will appear asking whether you want to overwrite the selected User Protocol
(Figure 3.11).
20
U S E R P R O T O C O L S : U s e r 1
C h o o s e l o c a t i o n f o r p r o t o c o l
1 . C H O
2 . M o n k e y
3 . H u m a n
4 .
5 .
> 6 .