Bio-Rad Gene Pulser Xcell™ Electroporation Systems User Manual
Page 33
27
•
To enter the User Protocols screen from the Home screen (Figure 3.2):
•
Press 5 or use the Up and Down Arrow keys to highlight “User Protocols”, then press Enter
to view the first User Directory screen (Figure 3.15).
•
Use the Right and Left Arrow keys to toggle between the two User Directory screens. Press
1–12 or use the Up and Down Arrow keys to highlight the number corresponding to the
desired User Name.
•
Press Enter to select the name and to view the User Protocols Screen (Figure 3.16).
•
Press 1–12 or use the Up, Down, Left, and Right Arrow keys to highlight a User Protocol without
an entry. If necessary, delete a User Protocol as described in Section 3.5.5. Press Enter to view the
Select Method screen (Figure 3.17).
•
Press 1–3 or use the Up and Down Arrow keys to highlight the number corresponding to delivering
an exponential decay pulse (Exponential protocol), an exponential decay pulse specifying the time
constant (Time constant protocol), or a square wave pulse (Square wave protocol). Press Enter to
make a selection and to view the appropriate Protocol Detail screen.