Bio-Rad Gene Pulser Xcell™ Electroporation Systems - Manual (Page 38)

• Use the alpha-numeric keypad or the Up and Down Arrow keys to select the position with the
protocol to be deleted.
• Press the Delete key. A warning screen will appear asking whether you want to delete the selected
User Protocol (Figure 3.22). The default selection is “No”.
• If you do not want to delete the Protocol, press Back or Enter. The program will return to the
previous User Protocols screen.
• To delete the Protocol, press the Left Arrow key to select “Yes”, then press Enter. The User
Protocol name as well as all of the parameters under that User Protocol is deleted. The
program will return to the User Protocols screen with the selected User Protocol deleted.
Warning screen: delete protocol
Fig. 3.22. Warning screen: delete protocol.
Delete a User Name as follows.
• With the User Directory screen on the LCD, press the Up or Down Arrow keys or use the alpha-
numeric keypad to select the name to be deleted. Use the Left and Right Arrow keys to toggle
between the two User Directory screens.
• Press the Delete key. If there are no protocols in the User Name file, a warning screen will appear
asking whether you want to delete the selected User Name (Figure 3.23). The default selection is
“No”.
• If you do not want to delete the file, press Enter. The program will return to the User Directory
screen.
• To delete the User Name, press the Left Arrow key to select “Yes”, then press Enter. The
program will return to the User Directory with the selected User Name deleted.
• If there are protocols in the User Name file, the following screen will appear: “All User Protocols
under this name must be deleted before this user name can be deleted.” Follow the steps above
for deleting the User Protocols.
32
D o y o u w a n t t o d e l e t e t h e
p r o t o c o l ?
Y E S N O
P r e s s B A C K o r E N T E R t o r e t u r n
t o t h e p r e v i o u s s c r e e n .
P r e s s t h e L E F T a r r o w t h e n
E N T E R t o d e l e t e t h e n a m e .