Bio-Rad Gene Pulser Xcell™ Electroporation Systems - Manual (Page 81)

Section 10
Specifications and Product Information
10.1 System Specifications
165-2660 Gene Pulser Xcell Total System
Includes Main Unit, CE module, PC module
Outputs
Waveform: Exponential decay or Square wave.
Voltage: 10–3,000 Volts
Capacitance 10–500 V, 25–3275 mF in 25 mF increments.
500–3000 V, 10, 25, 50 mF.
Resistance (Parallel) 50–1,000
Ω in 50 Ω increments plus infinity.
Sample Resistance 20
Ω minimum at 10–2,500 V
600
Ω minimum at 2,500–3,000 V
Square Wave Timing 10–500 V: 0.05–100 msec pulse length, 1–10 pulses,
0.1–10 sec pulse interval
500–3,000 V: 0.05–5 msec pulse length, 1–2 pulses,
5–30 sec pulse interval
165-2661 Gene Pulser Xcell Eukaryotic System
Includes Main Unit, CE module
Outputs same as Total system without the parallel resistance.
165-2662 Gene Pulser Xcell Microbial System
Includes main unit, PC module
Outputs
Waveform: Exponential decay or Square wave.
Voltage: 200–3,000 Volts
Capacitance 10, 25, 50 µF.
Resistance (Parallel) 50–1,000
Ω in 50 Ω increments plus infinity.
Sample Resistance 20 Ω minimum at 200–2,500 V
600 Ω minimum at 2,500–3,000 V
Square Wave Timing 0.05–5 msec pulse length, 1–2 pulses,
5–30 pulse interval
165-2666 Gene Pulser Xcell Main Unit
Outputs Waveform: Exponential decay or Square wave.
Voltage: 200–3,000 Volts
Discharge Capacitance 10, 25, 50 µF.
Sample Resistance 20
Ω minimum at 200–2,500 V
600
Ω minimum at 2,500–3,000 V
Square Wave Timing 0.05–5 msec pulse length, 1–2 pulses,
5–30 sec pulse interval
General
Input Voltage 100–120 VAC or 220–240 VAC, 50/60 Hz.
Power Max 240 W (During short charging periods)
Operating environment Temp. 0–35°C, Humidity 0–95%, (non-condensing).
Regulatory Safety EN 61010, EMC EN61326 Class A
Dimensions, Main Unit: 31 x 30 x 14 cm, weight 6.62 kg.
CE Module: 31 x 28 x 9 cm, weight 3.08 kg.
PC Module: 31 x 28 x 5 cm, weight 1.90 kg.
75