Wpt pages – Garmin GNS 430 User Manual
Page 104
96
Duplicate Waypoints
Once the identifi er, facility name or location is entered, all six airport pages will
display information for the selected airport. As you enter an identifi er, facility name or
location, the GNS 430’s Spell’N’Find™ feature will scroll through the database, display-
ing those waypoints matching the characters you have entered to that point. If duplicate
entries exist for the entered facility name or location, additional entries may be viewed by
continuing to rotate the small right knob (
a
) during the selection process (see page 95).
If duplicate entries exist for an entered identifi er, a duplicate waypoint page will appear
once you select the identifi er (by pressing E).
To select a facility name or location, where duplicate entries exist:
1. Select the desired facility name or location, following the steps on page 95.
2a. As you spell the facility name or location, using the small (
a
) and large (
d
) right knobs, the
GNS 430’s Spell’N’Find feature will select the first entry in the database based upon the charac-
ters you have entered up to that point.
3a. Continue rotating the small right knob (
a
) to scroll through any additional database listings for
the selected facility name or location. You can scroll backwards with the small right knob (
b
)
if you scroll past the desired facility name or location.
4. Press
E
to select the desired facility name or location.
5. To remove the flashing cursor, press the small right knob (
r
).
To select a waypoint identifier from a list of duplicates:
1. Select the desired airport or navaid identifier following the steps on page 95.
2b. A duplicate waypoints window will appear. Rotate the large right knob (
d
) to select the the
desired waypoint and press
E
.
3b. To remove the flashing cursor, press the small right knob (
r
).
WPT PAGES
Duplicate Waypoints
6
o
b
p
a
o
a
190-00140-00.indd 96
5/7/2003, 5:17:35 PM